DTF-Transfer | Sample

• Place the motive and logos on the size of the corresponding format.
• The printing process uses an extended colour space with CMYK+BORG+W, offering even more vibrant colours than the CYMK colour space.
• Please send the print file transparent (without background).
• File format: AI, PDF, PNG, ZIP
• Resolution: 300 dpi (recommended) or higher
• Please do not mirror the print file!

We will of course try to check the print data in advance, but we cannot guarantee that incorrectly transmitted data will be correct.

• Injection temperature: 110-130°C
• Compression pressure: medium pressure 2-3 bar (depending on the textile)
• Pre-pressing: 10 seconds
• Film can be peeled off hot, warm or cold
• Press again (if necessary): 3 seconds (use membrane or baking paper)

With DTF (Direct-to-Film) printing, the first wash of the textile should take place no sooner than 48 hours after printing . This waiting period allows the ink and powder adhesive to fully cure and bond optimally with the fabric.

Here are some additional tips to maximize shelf life:

1. Washing temperature: Washing the textile at max. 60 °C is recommended, max. 40 °C is recommended.

2. Gentle wash cycle: Use a gentle wash cycle and turn the garment inside out.

3. No fabric softener: Avoid using fabric softener, as it can impair print quality.

4. No dryer: Let the textile air dry to protect the print.

Manufacturer:
as Creativ
Am Dörrenhof 21
85131 Pollenfeld
+49 151 62681266
info@as-creativ.de

Responsible person:
as Creativ
Am Dörrenhof 21
85131 Pollenfeld
+49 151 62681266
info@as-creativ.de

Warnings: not required
Safety instructions: not required